hi , just looking at a everdigim pump , does anyone know anything about these good points bad points are they smooth whenpumping etc...

I don't know but it must be better than a 36z putz. I was just out a trip with our new putz. What a lame machine..

It starts with putting out the outriggers.. According to the EOC this has to be done FULL GASS.  Clouds of dust flying around, get out the earpluggs!! 

No matter how slow you want to pump... It all has to be done on masive high revs. Nice for the fuel economy.. And also to make sure that if you plugg you will go straight up to 85 bar. Resulting in a hose exploding painting the whole building grey inside..

Ok.. switch off the EOC was my though but that doesn't help much. You have to rev it up to 1000+ revs otherwize it refuses to pump at all..

Also very strange is that sometimes it takes a long time between switching on the pump and when it actualy begins to pump. Sometimes up to 20 sec. Sometimes it starts after 3 sec.. Nice.

And then not to speak about the lame display with the scrowling function. Switch on the vibrator.. Ehhh wait.. let me go in to the menu... BS. 

Waterpump that is so powerfull that you can not put a tap on the hose to close it because the hose will explode.. Nice if you want to wash you clambs without getting wet..

I could go on for quite a while but it will not help because putz is so convinsed about its on right that they will not change anything..

My advice: BUY THAT EVERDIGM !!!  We have some cheaper brands pumps in our shop and they are the most comfortable machines to work with. No problems. No BS. You get to decide yourself what they do instead of some computer programed by someone that only tests pumps pumping water at the factory instead of bad concrete through 60m 2,5'' hose outside in the real world under pressure from the crew, the factory, the shop and freezing weather.

Dip:Try turning OFF the air-cuff enable switch... It's on the computer cabinet, secong fdrom the right!

Pumpon

i just been to see a M33/5 Everdigim concrete pump and work it for a day and let me just say to you that im very happy with the way  it performed in pumping and smoth boom control. for a matter of fact i so happy with this concrete pump that i am looking to buying one and that is saying alot as been a   Putzmeister  customer for a very long time and nether look past Pustzmeister, but Everdigim have come a long way and i my opion they have produce a very good range of concrete pumps. The pictuers above are of a M39/5 Everdigim i did not get to see this pump it was deliverd to customer the day befor i got thier..

I have made one waterhose of  hydraulichose with pressed couplings ,  one flexible hydraulichose . Works well even if the temp is -20c . 

Change the settings of the EOC , I had it made on My Putz 46-5 frome 1350 to 1150 and Putz has aproved it . If I turn the EOC of it must up to 900 rpm to strat to pump . 

When I pump I have the display on the vibrator ,  and You will learn to count the clic when You turn the knob . One turn to the right aircuff ,  one to the left the agitator and so on . Always start the setting on the same symbol and You will learn and rember .

With the direction and the evolution of concrete pumps, where they have ended; there is no better and no worse. They all run so efficiently in their raw state you would find it hard to distinguish which is what brand if it wasnt branded with an ID plate.

Your mind has to now believe that any concrete pump is only as good as the truck chassis is on allows for. You get the right chassis with the pump, with the right specs, running gear, suspension, wheelbases, componentry and you wont even realise there is a concrete pump mounted on it, it will bring a smile to your face and plenty of profitable years.

Apart from the size of pump you want to buy be it 20 class, 30 class, 40 class and beyond, the truck chassis of you being comfortable with should be your second biggest decision when contacting any purchasing department.

Thing is VASA.. I drive a different pump every day. I started for my self renting me out as a backup driver to all pump companies in the area. I don't have time to set up all the pumps the way I want them. And that also shouldn't be nessesary should it? A good simpel pump should be easy to drive the first time like with the cheaper brands and older putz..

does anyone know about these pumps they are called kyungown ,   www.kwcpc.co.kr

they look like a copy of sermac booms and putz bottoms

Hey Dipstick outriggers out always whit eoc of especially in cold weather. Because of the low hydraulic oil temp.